Re: [PATCH 2/3] dt-bindings: mscc: Add RGMII RX and TX delay tuning
From: Rob Herring <robh@kernel.org>
Date: 2021-07-14 21:08:12
Also in:
linux-arm-kernel, lkml
On Tue, Jun 29, 2021 at 03:10:37PM +0530, Harini Katakam wrote:
Add optional properties to tune RGMII RX and TX delay. Signed-off-by: Harini Katakam <redacted> Signed-off-by: Radhey Shyam Pandey <redacted> Signed-off-by: Michal Simek <redacted>
Your S-o-b should be last as the last one to touch this.
quoted hunk ↗ jump to hunk
--- .../devicetree/bindings/net/mscc-phy-vsc8531.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt index 87a27d775d48..e201d24d8e27 100644 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt@@ -33,7 +33,14 @@ Optional properties: VSC8531_DUPLEX_COLLISION (8). - load-save-gpios : GPIO used for the load/save operation of the PTP hardware clock (PHC). - +- vsc8531,rx-delay : RGMII RX delay. Allowed values are defined in
'vsc8531' is not a vendor. The form is <vendor>,<propname>.
+ "include/dt-bindings/net/mscc-phy-vsc8531.h". + Default value, set by the driver is + VSC8531_RGMII_CLK_DELAY_2_0_NS. +- vsc8531,tx-delay : RGMII TX delay. Allowed values are defined in + "include/dt-bindings/net/mscc-phy-vsc8531.h". + Default value, set by the driver is + VSC8531_RGMII_CLK_DELAY_2_0_NS. Table: 1 - Edge rate change ----------------------------------------------------------------| -- 2.17.1