[PATCH AUTOSEL 5.4 24/51] ARM: dts: am437x: align gpio hog names with dt-schema
From: Sasha Levin <sashal@kernel.org>
Date: 2021-07-14 19:53:08
Also in:
linux-omap, lkml, stable
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Grygorii Strashko <grygorii.strashko@ti.com> [ Upstream commit bd551acdde3ad40da1a97391abd6e0db7852bf66 ] The GPIO Hog dt-schema node naming convention expect GPIO hogs node names to end with a 'hog' suffix. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++-- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 811c8cae315b..acc4c2760f46 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts@@ -802,7 +802,7 @@ &gpio0 { pinctrl-0 = <&gpio0_pins>; status = "okay"; - p23 { + sel-emmc-nand-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; /* SelEMMCorNAND selects between eMMC and NAND:
@@ -835,7 +835,7 @@ &gpio5 { status = "okay"; ti,no-reset-on-init; - p8 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a6fbc088daa8..45a44c705a70 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts@@ -717,7 +717,7 @@ &gpio2 { pinctrl-0 = <&display_mux_pins>; status = "okay"; - p1 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI
--
2.30.2