[PATCH AUTOSEL 5.13 027/108] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
From: Sasha Levin <sashal@kernel.org>
Date: 2021-07-14 19:38:57
Also in:
linux-arm-kernel, lkml, stable
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Primoz Fiser <redacted> [ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ] Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <redacted> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7bd658b7bdda..f3236204cb5a 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi@@ -322,8 +322,8 @@ pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 >; };
@@ -410,6 +410,7 @@ ®_soc { &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; status = "disabled"; };
--
2.30.2