Hi Rob,

On Tue, 2021-07-13 at 20:19 -0600, Rob Herring wrote:

On Mon, Jul 12, 2021 at 10:55:34AM +0200, Stefan Riedmueller wrote:

quoted

Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.

Although input-clock-frequency and pixel-clock-frequency have not been
definded as endpoint propierties in the textual bindings, the sensor
does parse them from the endpoint. Thus move these properties to the
endpoint in the new yaml bindings.

Signed-off-by: Stefan Riedmueller <redacted>
---
 .../bindings/media/i2c/aptina,mt9p031.yaml    | 75 +++++++++++++++++++
 .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ----------
 MAINTAINERS                                   |  1 +
 3 files changed, 76 insertions(+), 40 deletions(-)
 create mode 100644
Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 delete mode 100644
Documentation/devicetree/bindings/media/i2c/mt9p031.txt

diff --git
a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 000000000000..ad9a2db73d86

--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image

sensor
+  with an active array size of 2592H x 1944V. It is programmable through
a
+  simple two-wire serial interface.
+
+properties:
+  compatible:
+    enum:
+      - aptina,mt9p031
+      - aptina,mt9p031m
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: Chip reset GPIO
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#

Doesn't look like you use any properties from video-interfaces.yaml. You 
should just reference graph.yaml#/$defs/endpoint-base instead.

Thanks for your comment. It made me realize, that I have something wrong. The
driver does use properties from the video interface as it parses the bus
configuration from the endpoint. But I thought these properties were
implicitly used by referencing the video-interfaces schema. Now I assume that
I have to mention them here explicitly. Correct?

quoted

+        unevaluatedProperties: false
+
+        properties:
+          input-clock-frequency: true
+          pixel-clock-frequency: true

These are custom properties, so they need a type, description, and any 
constraints.

I'll add that.

Thanks,
Stefan

quoted

+
+        required:
+          - input-clock-frequency
+          - pixel-clock-frequency
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mt9p031@5d {
+            compatible = "aptina,mt9p031";
+            reg = <0x5d>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                mt9p031_1: endpoint {
+                    input-clock-frequency = <6000000>;
+                    pixel-clock-frequency = <96000000>;
+                };
+            };
+        };
+    };
+
+...

diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt

b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
deleted file mode 100644
index cb60443ff78f..000000000000

--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ /dev/null

@@ -1,40 +0,0 @@
-* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
-
-The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor

with
-an active array size of 2592H x 1944V. It is programmable through a
simple
-two-wire serial interface.
-
-Required Properties:
-- compatible: value should be either one among the following
-	(a) "aptina,mt9p031" for mt9p031 sensor
-	(b) "aptina,mt9p031m" for mt9p031m sensor
-
-- input-clock-frequency: Input clock frequency.
-
-- pixel-clock-frequency: Pixel clock frequency.
-
-Optional Properties:
-- reset-gpios: Chip reset GPIO
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		mt9p031@5d {
-			compatible = "aptina,mt9p031";
-			reg = <0x5d>;
-			reset-gpios = <&gpio3 30 0>;
-
-			port {
-				mt9p031_1: endpoint {
-					input-clock-frequency = <6000000>;
-					pixel-clock-frequency = <96000000>;
-				};
-			};
-		};
-		...
-	};

diff --git a/MAINTAINERS b/MAINTAINERS
index a61f4f3b78a9..33dd81237a91 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -12635,6 +12635,7 @@ M:	Laurent Pinchart <

laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
 
-- 
2.25.1