Re: [PATCH V5] arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card
From: <hidden>
Date: 2021-07-09 16:03:19
Also in:
linux-arm-msm, linux-mmc, lkml
On 2021-07-09 05:40, Stephen Boyd wrote:
Quoting Shaik Sajida Bhanu (2021-06-27 07:42:30)quoted
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsib/arch/arm64/boot/dts/qcom/sc7280.dtsi index a8c274a..c3e8740e 100644--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi@@ -436,6 +441,60 @@ #mbox-cells = <2>; }; + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sc7280-sdhci","qcom,sdhci-msm-v5";Is qcom,sc7280-sdhci compatible documented somewhere?
Yes, please find the link below: https://patchwork.kernel.org/project/linux-arm-msm/patch/1623835207-29462-1-git-send-email-sbhanu@codeaurora.org/
quoted
+ status = "disabled"; + + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0xc0 0x0>; + interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + bus-width = <8>; + supports-cqe; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + sdhc1_opp_table: sdhc1-opp-table {Please make it sdhc1_opp_table: opp-table {
Sure
quoted
+ compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; + }; + }; + + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>;@@ -1035,6 +1094,51 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sc7280-sdhci","qcom,sdhci-msm-v5"; + status = "disabled"; + + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x100 0x0>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "core", "iface", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + + qcom,dll-config = <0x0007642c>; + + sdhc2_opp_table: sdhc2-opp-table {Please make it sdhc2_opp_table: opp-table {
Sure
quoted
+ compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc";