Re: [PATCH v8 6/7] Documentation/hwmon: Add iei-wt61p803-puzzle hwmon driver documentation
From: Guenter Roeck <linux@roeck-us.net>
Date: 2021-07-05 16:14:41
Also in:
linux-doc, linux-hwmon, linux-leds, lkml
On 7/5/21 6:49 AM, Pavo Banicevic wrote:
From: Luka Kovacic <luka.kovacic@sartura.hr> Add the iei-wt61p803-puzzle driver hwmon driver interface documentation. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Signed-off-by: Pavo Banicevic <redacted> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Robert Marko <robert.marko@sartura.hr> --- .../hwmon/iei-wt61p803-puzzle-hwmon.rst | 42 +++++++++++++++++++
Needs to be added to index.rst.
quoted hunk ↗ jump to hunk
1 file changed, 42 insertions(+) create mode 100644 Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rstdiff --git a/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst new file mode 100644 index 000000000000..04b01e53760c --- /dev/null +++ b/Documentation/hwmon/iei-wt61p803-puzzle-hwmon.rst > @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver iei-wt61p803-puzzle-hwmon +======================================= + +Supported chips: + * IEI WT61P803 PUZZLE for IEI Puzzle M801 + + Prefix: 'iei-wt61p803-puzzle-hwmon' + +Author: Luka Kovacic <luka.kovacic@sartura.hr> + + +Description +----------- + +This driver adds fan and temperature sensor reading for some IEI Puzzle +series boards. + +Sysfs attributes +---------------- + +The following attributes are supported: + +- IEI WT61P803 PUZZLE for IEI Puzzle M801 + +/sys files in hwmon subsystem +----------------------------- + +================= == =================================================== +fan[1-5]_input RO files for fan speed (in RPM) +pwm[1-2] RW files for fan[1-2] target duty cycle (0..255)
There are also temperature sensors.
+================= == =================================================== + +/sys files in thermal subsystem +------------------------------- + +================= == ==================================================== +cur_state RW file for current cooling state of the cooling device + (0..max_state) +max_state RO file for maximum cooling state of the cooling device +================= == ====================================================