Hi Laurent,

On Fri, 2021-07-02 at 16:15 +0300, Laurent Pinchart wrote:

Hi Stefan,

Thank you for the patch.

On Fri, Jul 02, 2021 at 11:59:19AM +0200, Stefan Riedmueller wrote:

quoted

Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.

Can I volunteer you to convert these bindings to YAML first, and add the
properties on top ? :-)

Sure, I can give it a try :-)

Regards,
Stefan

quoted

Signed-off-by: Stefan Riedmueller <redacted>
---
 .../devicetree/bindings/media/i2c/mt9p031.txt        | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt

b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
index cb60443ff78f..4437d0e3147d 100644

--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt

@@ -9,6 +9,12 @@ Required Properties:
 	(a) "aptina,mt9p031" for mt9p031 sensor
 	(b) "aptina,mt9p031m" for mt9p031m sensor
 
+- clocks: Reference to the sensor input clock
+
+- vdd-supply: VDD supply regulator
+- vdd_io-supply: VDD_IO supply regulator
+- vaa-supply: VAA supply regulator
+
 - input-clock-frequency: Input clock frequency.
 
 - pixel-clock-frequency: Pixel clock frequency.

@@ -29,6 +35,12 @@ Example:
 			reg = <0x5d>;
 			reset-gpios = <&gpio3 30 0>;
 
+			clocks = <&sensor_clk>;
+
+			vdd-supply = <&reg_vdd>;
+			vdd_io-supply = <&reg_vdd_io>;
+			vaa-supply = <&reg_vaa>;
+
 			port {
 				mt9p031_1: endpoint {
 					input-clock-frequency = <6000000>;