[PATCH v3 12/12] ARM: tegra: nexus7: Enable USB OTG mode
From: Dmitry Osipenko <digetx@gmail.com>
Date: 2021-07-04 22:56:45
Also in:
linux-pm, linux-tegra, linux-usb, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Nexus 7 has OTG-cable microUSB port, enable OTG mode. USB peripheral devices now can be connected to Nexus 7 using OTG adapter, switching USB port into host mode. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- .../tegra30-asus-nexus7-grouper-common.dtsi | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 8bc552b09672..c341e8971b2f 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi@@ -941,9 +941,29 @@ power_supply: charger@6a { interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>; summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>; + summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>; summit,enable-usb-charging; monitored-battery = <&battery_cell>; + + usb_vbus: usb-vbus { + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-min-microamp = <750000>; + regulator-max-microamp = <750000>; + + /* + * SMB347 INOK input pin is connected to PMIC's + * ACOK output, which is fixed to ACTIVE_LOW as + * long as battery voltage is in a good range. + * + * Active INOK disables SMB347 output, so polarity + * needs to be toggled when we want to get the + * output. + */ + summit,needs-inok-toggle; + }; }; };
@@ -1017,12 +1037,13 @@ sdmmc4: mmc@78000600 { usb@7d000000 { compatible = "nvidia,tegra30-udc"; status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; + vbus-supply = <&usb_vbus>; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; nvidia,hssync-start-delay = <0>; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>;
--
2.32.0