RE: [PATCH v3 07/11] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings
From: Biju Das <biju.das.jz@bp.renesas.com>
Date: 2021-06-30 10:28:41
Also in:
linux-phy, linux-renesas-soc
Hi Geert, Thanks for the feedback.
Subject: Re: [PATCH v3 07/11] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings Hi Biju, Thanks for your patch! On Wed, Jun 30, 2021 at 9:31 AM Biju Das [off-list ref] wrote:quoted
Document USB phy bindings for RZ/G2L SoC. RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. Apart from this it uses a different OTG-BC interrupt bit for devicerecognition. Nothing about resets? But see below...
Initially the reset of USB/PHY port is in asserted state. So we need to perform a release reset using USBPHY control IP. OK, will add this in V4.
quoted
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- v2->v3 * Created a new compatible for RZ/G2L as per Geert's suggestion. * Added resets required properties for RZ/G2L SoC. --- .../bindings/phy/renesas,usb2-phy.yaml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index d5dc5a3cdceb..a7e585ff28dc 100644--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml@@ -30,6 +30,9 @@ properties: - renesas,usb2-phy-r8a77995 # R-Car D3 - const: renesas,rcar-gen3-usb2-phy + - items: + - const: renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC} + reg: maxItems: 1@@ -91,6 +94,21 @@ required: - clocks - '#phy-cells' +allOf: + - if: + properties: + compatible: + contains: + const: renesas,usb2-phy-r9a07g044 + then: + properties: + resets: + items: + - description: USB phy reset + - description: reset of USB 2.0 host sideDo you need the second reset? Looking at your .dtsi patch, the second reset is shared with ehci/ohci, so perhaps it makes sense to drop it from the phy node?
OK. Agreed will drop the second reset from phy node. Cheers, Biju
quoted
+ required: + - resets + additionalProperties: false examples:Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux- m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds