Hello,

This is v3 of the series for adding the isl7998x driver [0].

The isl7998x is an analog video to MIPI CSI-2 or BT.656 converter. The dt
binding describes only the isl79987 chip, which supports MIPI CSI-2. The
driver could be extended to handle isl79988 (for BT.656), too, but this isn't
implemented.

In v3, I updated the device tree bindings based on Robs review comments. In
the driver itself, only the powerdown gpio name has changed, to follow the dt
binding change.

Michael

[0] https://lore.kernel.org/linux-media/20190520201812.7937-1-marex@denx.de/ (local)

Changelog:

v3:

- rename pd-gpios property to powerdown-gpios
- reference graph.yaml for port/ports property
- remove reference to video-interfaces.txt

v2:

- convert dt binding to yaml
- change binding to ISL79987 only
- general driver cleanup
- convert driver to pm_runtime
- use ports in device tree for specifying inputs
- add reset gpio

Marek Vasut (2):
  media: dt-bindings: Add Intersil ISL79987 DT bindings
  media: i2c: isl7998x: Add driver for Intersil ISL7998x

 .../bindings/media/i2c/isil,isl79987.yaml     |  100 ++
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |    9 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/isl7998x.c                  | 1421 +++++++++++++++++
 5 files changed, 1539 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
 create mode 100644 drivers/media/i2c/isl7998x.c

-- 
2.29.2