Re: [PATCH] dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings

From
Geert Uytterhoeven <geert@linux-m68k.org>
Date
2021-06-11 18:23:39
Also in
linux-input, linux-renesas-soc
Reply to
Marek Vasut, 2021-06-11
Hi Marek,

On Fri, Jun 11, 2021 at 4:20 PM Marek Vasut [off-list ref] wrote:
On 6/11/21 3:54 PM, Geert Uytterhoeven wrote:
quoted
While Linux uses a different driver, the Ilitek
ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree
binding documentation is very similar.

   - Drop the fixed reg value, as some controllers use a different
     address,
   - Make reset-gpios optional, as it is not always wired.
It looks like there are now two drivers for the same hardware,
drivers/input/touchscreen/ili210x.c
drivers/input/touchscreen/ilitek_ts_i2c.c
The ilitek_ts_i2c (newer) seems to be derived from the ilitek example
code / driver, while the ili210x was written from scratch as far as I
can tell.
I'm not so sure they're for the same hardware, but you may know better?
https://www.displayvisions.us/fileadmin/html-seiten/eng/pdf/zubehoer/ILITek_TP_Programming_Guide_V1.50.pdf
lists only Ilitek parts handled by ilitek_ts_i2c.c.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Thread (8 messages) 8 messages, 6 authors, last reply 2021-06-16
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help