[PATCH 0/6] Add RZ/G2L USB2.0 phy and host support

This patch series adds USB2.0 phy and Host support for RZ/G2L SoC.

A new driver introduced for RZ/G2L USB phy control block,
which mainly controls reset and power down of the USB2.0/PHY.

This patchset is based on master branch [1]

[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/

Biju Das (6):
  dt-bindings: phy: renesas: Document RZ/G2L USB PHY Control bindings
  drivers: clk: renesas: r9a07g044-cpg: Add USB clocks
  phy: renesas: Add RZ/G2L usb phy control driver
  arm64: configs: defconfig: Enable RZ/G2L USB PHY control driver
  dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings
  arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support

 .../phy/renesas,rzg2l-usbphyctrl.yaml         |  50 ++++++
 .../bindings/phy/renesas,usb2-phy.yaml        |   1 +
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    |  81 +++++++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/renesas/r9a07g044-cpg.c           |   6 +
 drivers/phy/renesas/Kconfig                   |   7 +
 drivers/phy/renesas/Makefile                  |   1 +
 drivers/phy/renesas/phy-rzg2l-usbphyctrl.c    | 163 ++++++++++++++++++
 8 files changed, 310 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.yaml
 create mode 100644 drivers/phy/renesas/phy-rzg2l-usbphyctrl.c

-- 
2.17.1