[PATCH v5 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000
From: Qing Zhang <hidden>
Date: 2021-06-29 01:19:23
Also in:
linux-mips, lkml
Subsystem:
mips, the rest · Maintainers:
Thomas Bogendoerfer, Linus Torvalds
The module is now supported, enable it. Signed-off-by: Qing Zhang <redacted> --- v4-v5: add missing spaces arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 569e814def83..38bf14f00694 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi@@ -101,6 +101,16 @@ uart0: serial@1fe00000 { no-loopback-test; }; + pm: power-controller { + device_type = "power management"; + compatible = "loongson, reset-controller"; + + reg = <0 0x1fe0700c 0 0x8>, + <0 0x1fe07014 0 0x8>, + <0 0x1fe07030 0 0x8>; + reg-names = "pm1_sts", "pm1_cnt", "rst_cnt"; + }; + pci@1a000000 { compatible = "loongson,ls2k-pci"; device_type = "pci";
--
2.31.0