[PATCH v2 3/3] arm64: dts: qcom: Fix usb entries for SA8155p adp board
From: Bhupesh Sharma <hidden>
Date: 2021-06-27 11:46:52
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
SA8155p adp board has two USB A-type receptacles called USB-portB and USB-portC respectively. While USB-portB is a USB High-Speed connector/interface, the USB-portC one is a USB 3.1 Super-Speed connector/interface. Also the USB-portB is used as the USB emergency download port (for image download purposes). Enable both the ports on the board in USB Host mode (since all the USB interfaces are brought out to USB Type A connectors). Cc: Bjorn Andersson <redacted> Signed-off-by: Bhupesh Sharma <redacted> --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 60 ++++++++++++++++++++---- 1 file changed, 51 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 0da7a3b8d1bf..5ae2ddc65f7e 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts@@ -307,10 +307,6 @@ &qupv3_id_1 { status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>; -}; - &uart2 { status = "okay"; };
@@ -337,6 +333,16 @@ &ufs_mem_phy { vdda-pll-max-microamp = <18300>; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en1_default>; +}; &usb_1_hsphy { status = "okay";
@@ -346,15 +352,51 @@ &usb_1_hsphy { }; &usb_1_qmpphy { + status = "disabled"; +}; + +&usb_2 { status = "okay"; - vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; }; -&usb_1 { +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb2phy_ac_en2_default>; +}; + +&usb_2_hsphy { status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; }; -&usb_1_dwc3 { - dr_mode = "peripheral"; +&usb_2_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + usb2phy_ac_en1_default: usb2phy_ac_en1_default { + mux { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; + + usb2phy_ac_en2_default: usb2phy_ac_en2_default { + mux { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; + }; + }; };
--
2.31.1