@@ -9,8 +9,7 @@ Messaging Protocol (QMP)
 
 The AOSS side channel exposes control over a set of resources, used to control
 a set of debug related clocks and to affect the low power state of resources
-related to the secondary subsystems. These resources are exposed as a set of
-power-domains.
+related to the secondary subsystems.
 
 - compatible:
 	Usage: required

@@ -46,14 +45,6 @@ power-domains.
 	Definition: must be 0
 		    The single clock represents the QDSS clock.
 
-- #power-domain-cells:
-	Usage: optional
-	Value type: <u32>
-	Definition: must be 1
-		    The provided power-domains are:
-		    CDSP state (0), LPASS state (1), modem state (2), SLPI
-		    state (3), SPSS state (4) and Venus state (5).
-
 = SUBNODES
 The AOSS side channel also provides the controls for three cooling devices,
 these are expressed as subnodes of the QMP node. The name of the node is used

@@ -66,8 +57,7 @@ to identify the resource and must therefor be "cx", "mx" or "ebi".
 
 = EXAMPLE
 
-The following example represents the AOSS side-channel message RAM and the
-mechanism exposing the power-domains, as found in SDM845.
+The following example represents the AOSS side-channel message RAM as found in SDM845.
 
   aoss_qmp: qmp@c300000 {
 	  compatible = "qcom,sdm845-aoss-qmp";

@@ -75,8 +65,6 @@ mechanism exposing the power-domains, as found in SDM845.
 	  interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 	  mboxes = <&apss_shared 0>;
 
-	  #power-domain-cells = <1>;
-
 	  cx_cdev: cx {
 		#cooling-cells = <2>;
 	  };