[PATCH v2 03/13] dt-bindings: usb: mtu3: add support property role-switch-default-mode
flat view
STALE1914d
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: 2021-06-18 09:30:38
Also in:
linux-arm-kernel, linux-mediatek, linux-usb, lkml
Subsystem:
mediatek usb3 drd ip driver, open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Chunfeng Yun, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Revision v2 of 2 in this series.
Revisions (2)
- v2 current
- v3 [diff vs current]
Add support optional property of role-switch-default-mode, used to set default mode while usb role is USB_ROLE_NONE when use usb-role-switch to switch mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: no changes --- Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 3e6f2750f48d..104f1f7edaf0 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml@@ -116,6 +116,10 @@ properties: description: Support role switch. type: boolean + role-switch-default-mode: + enum: [host, peripheral] + default: host + connector: $ref: /connector/usb-connector.yaml# description:
@@ -184,6 +188,7 @@ patternProperties: dependencies: connector: [ 'usb-role-switch' ] port: [ 'usb-role-switch' ] + role-switch-default-mode: [ 'usb-role-switch' ] wakeup-source: [ 'mediatek,syscon-wakeup' ] required:
@@ -288,6 +293,7 @@ examples: wakeup-source; dr_mode = "otg"; usb-role-switch; + role-switch-default-mode = "host"; #address-cells = <1>; #size-cells = <1>; ranges;
--
2.18.0