Re: [PATCH 4/6] arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
From: Bjorn Andersson <hidden>
Date: 2021-06-16 02:44:38
Also in:
linux-arm-msm, lkml
On Tue 15 Jun 19:58 CDT 2021, Konrad Dybcio wrote:
Enabling the hardware thankfully comes down to a simple status = "okay". We assume that the firmware is provided by the Linux distribution, as it's signed and needs to come from the stock Android.
Are you okay with the default firmware paths? Or perhaps would it be better to shove them into qcom/sm8250/sony/<some-identifier>/* to avoid moving them later? Regards, Bjorn
quoted hunk ↗ jump to hunk
Signed-off-by: Konrad Dybcio <redacted> --- arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 0d7e3dbb12b1..82ae246694ad 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi@@ -118,6 +118,10 @@ ramoops@ffc00000 { }; }; +&adsp { + status = "okay"; +}; + &apps_rsc { pm8150-rpmh-regulators { compatible = "qcom,pm8150-rpmh-regulators";@@ -410,6 +414,10 @@ vreg_l7f_1p8: ldo7 { }; }; +&cdsp { + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>;@@ -516,6 +524,10 @@ &sdhc_2 { no-emmc; }; +&slpi { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <40 4>, <52 4>;-- 2.32.0