Re: [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs

On Tue, 2021-06-08 at 16:01 +0200, Matthias Brugger wrote:

On 08/06/2021 05:16, Kewei Xu wrote:

quoted

From: "Kewei.Xu" <redacted>

When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.

Signed-off-by: Kewei.Xu <redacted>
---
 drivers/i2c/busses/i2c-mt65xx.c | 97 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 95 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 5ddfa4e..e65a41e 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c

@@ -125,6 +125,7 @@ enum I2C_REGS_OFFSET {
 	OFFSET_HS,
 	OFFSET_SOFTRESET,
 	OFFSET_DCM_EN,
+	OFFSET_MULTI_DMA,
 	OFFSET_PATH_DIR,
 	OFFSET_DEBUGSTAT,
 	OFFSET_DEBUGCTRL,

@@ -192,8 +193,9 @@ enum I2C_REGS_OFFSET {
 	[OFFSET_TRANSFER_LEN_AUX] = 0x44,
 	[OFFSET_CLOCK_DIV] = 0x48,
 	[OFFSET_SOFTRESET] = 0x50,
+	[OFFSET_MULTI_DMA] = 0x84,
 	[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
-	[OFFSET_DEBUGSTAT] = 0xe0,
+	[OFFSET_DEBUGSTAT] = 0xe4,

Is this offset only for mt8192 or also for mt8183?
In any case that should go in as another patch. Either a fix or a new
mt_i2c_regs_v3[]

Regards,

  Matthias

Hi Matthias,

This offset value is suitable for the IC of mt_i2c_regs_v2 hardware
design similar to mt8192/8195, not for 8183.

The reason for the modification here is that the previous
offset information is incorrect, OFFSET_DEBUGSTAT = 0XE4 is
the correct value.

Regards,
Kewei