[RESEND, V5 1/2] dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: 2021-06-04 02:05:37
Also in:
linux-arm-kernel, linux-pci, lkml
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
The i.MX8MQ PCIe PHY can use either a 1.8V or a 3.3V power supply. Add a "vph-supply" property to indicate which regulator supplies power for the PHY. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> --- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index de4b2baf91e8..d8971ab99274 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt@@ -38,6 +38,9 @@ Optional properties: The regulator will be enabled when initializing the PCIe host and disabled either as part of the init process or when shutting down the host. +- vph-supply: Should specify the regulator in charge of VPH one of the three + PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage + supplies. Additional required properties for imx6sx-pcie: - clock names: Must include the following additional entries:
--
2.17.1