Thread (6 messages) 6 messages, 4 authors, 2021-05-18
STALE1798d

[RFC PATCH 1/3] dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: 2021-05-16 02:42:41
Also in: linux-media
Subsystem: media drivers for freescale imx7/8, media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers: Laurent Pinchart, Frank Li, Martin Kepplinger-Novakovic, Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

The i.MX8MM integrates a CSI bridge IP core, as the i.MX7. There seems
to be no difference between the two SoCs according to the reference
manual, but as documentation may not be accurate, add a compatible
string for the i.MX8MM, with a fallback on the compatible i.MX7.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 .../devicetree/bindings/media/nxp,imx7-csi.yaml      | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
index d91575b8ebb9..5922a2795167 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX7 CMOS Sensor Interface
+title: i.MX7 and i.MX8 CSI bridge (CMOS Sensor Interface)
 
 maintainers:
   - Rui Miguel Silva <rmfrfs@gmail.com>
@@ -15,9 +15,13 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx7-csi
-      - fsl,imx6ul-csi
+    oneOf:
+      - enum:
+          - fsl,imx7-csi
+          - fsl,imx6ul-csi
+      - items:
+          - const: fsl,imx8mm-csi
+          - const: fsl,imx7-csi
 
   reg:
     maxItems: 1
-- 
Regards,

Laurent Pinchart
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help