[PATCH 2/2] mmc: sdhci-esdhc-imx: add support for disabling HS400 mode via DT
From: Lucas Stach <dev@lynxeye.de>
Date: 2021-05-08 20:57:37
Also in:
linux-arm-kernel, linux-mmc
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, secure digital host controller interface (sdhci) driver, secure digital host controller interface (sdhci) nxp i.mx driver, the rest · Maintainers:
Ulf Hansson, Adrian Hunter, Haibo Chen, Linus Torvalds
On some boards the data strobe line isn't wired up, rendering HS400 support broken, even if both the controller and the eMMC claim to support it. Allow to disable HS400 mode via DT. Signed-off-by: Lucas Stach <dev@lynxeye.de> --- drivers/mmc/host/sdhci-esdhc-imx.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index a20459744d21..1d6068507fb6 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c@@ -1483,6 +1483,9 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (of_find_property(np, "no-1-8-v", NULL)) host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + if (of_find_property(np, "no-mmc-hs400", NULL)) + host->quirks2 &= ~SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400; + if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) boarddata->delay_line = 0;
--
2.31.1