[PATCH v5 2/6] dt-bindings: iio: accel: fxls8962af: add bindings
From: Sean Nyekjaer <hidden>
Date: 2021-05-06 07:09:52
Also in:
linux-iio
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF accelerometer sensor. Signed-off-by: Sean Nyekjaer <redacted> --- Changes for v2: - removed requirement for interrupt Changes for v3: - None Changes for v4: - Included the dt patch from the RFC Changes for v5: - fixed interrupt enum .../bindings/iio/accel/nxp,fxls8962af.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
new file mode 100644
index 000000000000..ad529ab2c6e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml@@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver + +maintainers: + - Sean Nyekjaer <sean@geanix.com> + +description: | + NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports + SPI and I2C interface. + https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + +properties: + compatible: + enum: + - nxp,fxls8962af + - nxp,fxls8964af + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + interrupt-names: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@62 { + compatible = "nxp,fxls8962af"; + reg = <0x62>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "nxp,fxls8962af"; + reg = <0>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + };
--
2.31.0