[PATCH v2] arm64: dts: meson-gxbb: nanopi-k2: Enable Bluetooth
From: Chen-Yu Tsai <wens@kernel.org>
Date: 2021-05-04 04:17:06
Also in:
linux-amlogic, linux-arm-kernel, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
From: Chen-Yu Tsai <redacted> The NanoPi K2 has a AP6212 WiFi+BT combo module. The WiFi portion is already enabled. The BT part is connected via UART and I2S. Enable the UART and add a device node describing the Bluetooth portion of the module. Signed-off-by: Chen-Yu Tsai <redacted> --- Changes since v1: - added uart-has-rtscts property - added alias for uart_A Hi Neil, Martin, I dropped your review-bys since I added the UART alias and I'm not sure what the policy for those are. ChenYu --- .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 7273eed5292c..f017a263784f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts@@ -15,6 +15,7 @@ / { aliases { serial0 = &uart_AO; + serial1 = &uart_A; ethernet0 = ðmac; };
@@ -385,9 +386,20 @@ &uart_AO { /* Bluetooth on AP6212 */ &uart_A { - status = "disabled"; + status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&wifi_32k>; + clock-names = "lpo"; + vbat-supply = <&vddio_ao3v3>; + vddio-supply = <&vddio_ao18>; + host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; }; /* 40-pin CON1 */
--
2.31.1