Re: [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.
From: Andrew Jeffery <hidden>
Date: 2021-05-27 01:28:28
Also in:
linux-arm-kernel, linux-aspeed, linux-gpio, lkml
Hi Steven, On Wed, 26 May 2021, at 19:16, Steven Lee wrote:
AST2600 supports 2 SGPIO master interfaces one with 128 pins another one with 80 pins.
Is there any chance the serial GPIO controllers can be explicitly listed in the Memory Space Allocation Table of the datasheet? Currently they're covered by the entry for "GPIO Controller (Parallel GPIO)" which is listed as ranging from 0x1e780000-0x1e7807ff. Admittedly the details are listed in chapter 41 for the GPIO Controller, but it would be handy to not have to dig.
quoted hunk ↗ jump to hunk
Signed-off-by: Steven Lee <redacted> --- arch/arm/boot/dts/aspeed-g6.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index f96607b7b4e2..556ce9535c22 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi@@ -377,6 +377,38 @@ #interrupt-cells = <2>; }; + sgpiom0: sgpiom@1e780500 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpiom"; + reg = <0x1e780500 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + max-ngpios = <128>;
I need to think more about this one. Andrew