[PATCH v2 07/18] media: cadence: csi2rx: Soft reset the streams before starting capture
From: Pratyush Yadav <hidden>
Date: 2021-05-26 15:24:08
Also in:
dmaengine, linux-media, linux-phy, lkml
Subsystem:
cadence mipi-csi2 bridges, media input infrastructure (v4l/dvb), the rest · Maintainers:
Maxime Ripard, Mauro Carvalho Chehab, Linus Torvalds
This resets the stream state machines and FIFOs, giving them a clean slate. On J721E if the streams are not reset before starting the capture, the captured frame gets wrapped around vertically on every run after the first. Signed-off-by: Pratyush Yadav <redacted> --- (no changes since v1) drivers/media/platform/cadence/cdns-csi2rx.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 459326de2eff..80a50284e525 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c@@ -39,6 +39,7 @@ #define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100) #define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000) +#define CSI2RX_STREAM_CTRL_SOFT_RST BIT(4) #define CSI2RX_STREAM_CTRL_START BIT(0) #define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008)
@@ -150,12 +151,22 @@ struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev) static void csi2rx_reset(struct csi2rx_priv *csi2rx) { + int i; + writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT, csi2rx->base + CSI2RX_SOFT_RESET_REG); udelay(10); writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG); + + /* Reset individual streams. */ + for (i = 0; i < csi2rx->max_streams; i++) { + writel(CSI2RX_STREAM_CTRL_SOFT_RST, + csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + usleep_range(10, 20); + writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + } } static int csi2rx_configure_external_dphy(struct csi2rx_priv *csi2rx)
--
2.30.0