[PATCH v8 1/9] clk: tegra30: Use 300MHz for video decoder by default
From: Dmitry Osipenko <digetx@gmail.com>
Date: 2021-05-16 16:31:12
Also in:
linux-clk, linux-tegra, lkml
Subsystem:
common clk framework, tegra clock driver, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Peter De Schrijver, Prashant Gaikwad, Linus Torvalds
The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.
Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <redacted>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/clk/tegra/clk-tegra30.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 16dbf83d2f62..a33688b2359e 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c@@ -1245,7 +1245,7 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 }, { TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 }, { TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 }, - { TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 600000000, 0 }, + { TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 300000000, 0 }, { TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 }, { TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 }, { TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
--
2.30.2