[PATCH net-next v6 01/25] net: dsa: qca8k: change simple print to dev variant
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-05-14 21:00:32
Also in:
lkml, netdev
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Change pr_err and pr_warn to dev variant. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/dsa/qca8k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index cdaf9f85a2cb..0b295da6c356 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c@@ -701,7 +701,7 @@ qca8k_setup(struct dsa_switch *ds) /* Make sure that port 0 is the cpu port */ if (!dsa_is_cpu_port(ds, 0)) { - pr_err("port 0 is not the CPU port\n"); + dev_err(priv->dev, "port 0 is not the CPU port"); return -EINVAL; }
@@ -711,7 +711,7 @@ qca8k_setup(struct dsa_switch *ds) priv->regmap = devm_regmap_init(ds->dev, NULL, priv, &qca8k_regmap_config); if (IS_ERR(priv->regmap)) - pr_warn("regmap initialization failed"); + dev_warn(priv->dev, "regmap initialization failed"); ret = qca8k_setup_mdio_bus(priv); if (ret)
--
2.30.2