From: Wesley Cheng <redacted>

Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B.  This will provide the VBUS source to connected
peripherals.

bod: Add minimum and maximum amperage values for the VBUS current provided
     by the pm8150b.

Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Wesley Cheng <redacted>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index b21e56a46145b..2a90d773810ad 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi

@@ -53,6 +53,14 @@ power-on@800 {
 			status = "disabled";
 		};
 
+		pm8150b_vbus: dcdc@1100 {
+			compatible = "qcom,pm8150b-vbus-reg";
+			regulator-min-microamp = <500000>;
+			regulator-max-microamp = <3000000>;
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
 		pm8150b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;

-- 
2.30.1