On Thu, 2021-04-22 at 14:45 +0200, Andrew Lunn wrote:

EXTERNAL EMAIL: Do not click links or open attachments unless you know the
content is safe

quoted

+#define PORT_T1_PHY_RESET    BIT(15)
+#define PORT_T1_PHY_LOOPBACK BIT(14)
+#define PORT_T1_SPEED_100MBIT        BIT(13)
+#define PORT_T1_POWER_DOWN   BIT(11)
+#define PORT_T1_ISOLATE      BIT(10)
+#define PORT_T1_FULL_DUPLEX  BIT(8)

These appear to be standard BMCR_ values. Please don't define your
own.

quoted

+
+#define REG_PORT_T1_PHY_BASIC_STATUS 0x01
+
+#define PORT_T1_MII_SUPPRESS_CAPABLE BIT(6)
+#define PORT_T1_LINK_STATUS          BIT(2)
+#define PORT_T1_EXTENDED_CAPABILITY  BIT(0)
+
+#define REG_PORT_T1_PHY_ID_HI 0x02
+#define REG_PORT_T1_PHY_ID_LO 0x03

MII_PHYSID1 and MII_PHYSID2

Please go through all these #defines and replace them with the
standard ones Linux provides. You are obfusticating the code by not
using what people already know.

Sure, i will review it for all the definitions.

      Andrew