Hi,

On Tue, Apr 20, 2021 at 10:21 AM [off-list ref] wrote:

On 2021-04-15 01:55, Doug Anderson wrote:

quoted

Hi,

On Tue, Apr 13, 2021 at 3:59 AM [off-list ref] wrote:

quoted

quoted

quoted

quoted

quoted

quoted

+                                       required-opps =
<&rpmhpd_opp_low_svs>;
+                                       opp-peak-kBps = <1200000
76000>;
+                                       opp-avg-kBps = <1200000
50000>;

Why are the kBps numbers so vastly different than the ones on sc7180
for the same OPP point. That implies:

a) sc7180 is wrong.

b) This patch is wrong.

c) The numbers are essentially random and don't really matter.

Can you identify which of a), b), or c) is correct, or propose an
alternate explanation of the difference?

We calculated bus votes values for both sc7180 and sc7280 with ICB
tool,
above mentioned values we got for sc7280.

I don't know what an ICB tool is. Please clarify.

Also: just because a tool spits out numbers that doesn't mean it's
correct. Presumably the tool could be wrong or incorrectly configured.
We need to understand why these numbers are different.

we checked with ICB tool team on this they conformed as Rennell &
Kodiak
are different chipsets,
we might see delta in ib/ab values due to delta in scaling factors.

...but these numbers are in kbps, aren't they? As I understand it
these aren't supposed to be random numbers spit out by a tool but are
supposed to be understandable by how much bandwidth an IP block (like
MMC) needs from the busses it's connected to. Since the MMC IP block
on sc7180 and sc7280 is roughly the same there shouldn't be a big
difference in numbers.

Something smells wrong.

Adding a few people who understand interconnects better than I do,
though.

ICB team has re-checked the Rennell ICB tool and they confirmed that
some configs were wrong in Rennell ICB tool and they corrected it.With
the new updated Rennell ICB tool below are the values :


Rennell LC:(Sc7180)

opp-384000000 {
              opp-hz = /bits/ 64 <384000000>;
              required-opps = <&rpmhpd_opp_nom>;
              opp-peak-kBps = <5400000 490000>;
              opp-avg-kBps = <6600000 300000>;
};


And now, these values are near to Kodaik LC values:

Kodaik LC:(SC7280)

opp-384000000 {
            opp-hz = /bits/ 64 <384000000>;
            required-opps = <&rpmhpd_opp_nom>;
            opp-peak-kBps = <5400000 399000>;
            opp-avg-kBps = <6000000 300000>;
};

This still isn't making sense to me.

* sc7180 and sc7280 are running at the same speed. I'm glad the
numbers are closer now, but I would have thought they'd be exactly the
same.

* Aren't these supposed to be sensible? This is eMMC that does max
transfer rates of 400 megabytes / second to the external device. You
have bandwidths listed here of 5,400,000 kBps = 5,400,000 kilobytes /
second = 5400 megabytes / second. I can imagine there being some
overhead where an internal bus might need to be faster but that seems
excessive. This is 13.5x!

* I can't see how it can make sense that "average" values are higher
than "peak" values.

It still feels like there's a misconfiguration somewhere.

-Doug