[PATCH v4 05/18] dt-bindings: timer: arm,arch_timer: Add interrupt-names support
From: Hector Martin <hidden>
Date: 2021-04-02 09:06:34
Also in:
linux-arch, linux-arm-kernel, linux-doc, lkml
Subsystem:
clocksource, clockevent drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Daniel Lezcano, Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Not all platforms provide the same set of timers/interrupts, and Linux only needs one (plus kvm/guest ones); some platforms are working around this by using dummy fake interrupts. Implementing interrupt-names allows the devicetree to specify an arbitrary set of available interrupts, so the timer code can pick the right one. This also adds the hyp-virt timer/interrupt, which was previously not expressed in the fixed 4-interrupt form. Reviewed-by: Linus Walleij <redacted> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Hector Martin <redacted> --- .../bindings/timer/arm,arch_timer.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index 2c75105c1398..7f5e3af58255 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml@@ -34,11 +34,30 @@ properties: - arm,armv8-timer interrupts: + minItems: 1 + maxItems: 5 items: - description: secure timer irq - description: non-secure timer irq - description: virtual timer irq - description: hypervisor timer irq + - description: hypervisor virtual timer irq + + interrupt-names: + oneOf: + - minItems: 2 + items: + - const: phys + - const: virt + - const: hyp-phys + - const: hyp-virt + - minItems: 3 + items: + - const: sec-phys + - const: phys + - const: virt + - const: hyp-phys + - const: hyp-virt clock-frequency: description: The frequency of the main counter, in Hz. Should be present
--
2.30.0