Thread (2 messages) 2 messages, 2 authors, 2021-03-11

Re: [PATCH v2 1/4] mmc: Mediatek: add Inline Crypto Engine support

From: Eric Biggers <ebiggers@kernel.org>
Date: 2021-03-11 18:44:59
Also in: linux-mmc

On Tue, Mar 09, 2021 at 09:56:31AM +0800, Peng Zhou wrote:
quoted hunk ↗ jump to hunk
1. add crypto clock control and ungate it before CQHCI init

2. set MMC_CAP2_CRYPTO property of eMMC

Signed-off-by: Peng Zhou <redacted>
---
 drivers/mmc/host/mtk-sd.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 898ed1b023df..1c90360d6cf2 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -442,6 +442,7 @@ struct msdc_host {
 	struct clk *src_clk_cg; /* msdc source clock control gate */
 	struct clk *sys_clk_cg;	/* msdc subsys clock control gate */
 	struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
+	struct clk *crypto_clk; /* msdc crypto clock */
 	u32 mclk;		/* mmc subsystem clock frequency */
 	u32 src_clk_freq;	/* source clock frequency */
 	unsigned char timing;
@@ -802,6 +803,7 @@ static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
 
 static void msdc_gate_clock(struct msdc_host *host)
 {
+	clk_disable_unprepare(host->crypto_clk);
 	clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
 	clk_disable_unprepare(host->src_clk_cg);
 	clk_disable_unprepare(host->src_clk);
@@ -822,6 +824,7 @@ static void msdc_ungate_clock(struct msdc_host *host)
 		dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
 		return;
 	}
+	clk_prepare_enable(host->crypto_clk);
 
 	while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
 		cpu_relax();
@@ -2512,6 +2515,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
+	/* only eMMC has crypto property */
+	if ((mmc->caps2 & MMC_CAP2_NO_SD) && (mmc->caps2 & MMC_CAP2_NO_SDIO)) {
+		host->crypto_clk = devm_clk_get(&pdev->dev, "crypto");
+		if (IS_ERR(host->crypto_clk))
+			host->crypto_clk = NULL;
+		else
+			mmc->caps2 |= MMC_CAP2_CRYPTO;
+	}
+
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq < 0) {
 		ret = -EINVAL;
@@ -2582,6 +2594,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		host->dma_mask = DMA_BIT_MASK(32);
 	mmc_dev(mmc)->dma_mask = &host->dma_mask;
 
+	/* here ungate due to cqhci init will access registers */
+	msdc_ungate_clock(host);
 	if (mmc->caps2 & MMC_CAP2_CQE) {
 		host->cq_host = devm_kzalloc(mmc->parent,
 					     sizeof(*host->cq_host),
@@ -2618,7 +2632,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	spin_lock_init(&host->lock);
 
 	platform_set_drvdata(pdev, mmc);
-	msdc_ungate_clock(host);
 	msdc_init_hw(host);
I'm still not able to apply this patch.  You can see yourself if you check out
v5.12-rc2 (or mmc/next), download this email from lkml.kernel.org
(https://lkml.kernel.org/linux-mmc/20210309015630.19545-1-peng.zhou@mediatek.com/raw),
and use 'git am'.  It's probably related to the email being base64-encoded,
which it shouldn't be.

Also, this patch series isn't in a thread, so it's hard to follow.

Please make sure you use 'git format-patch --cover-letter v5.12-rc2..@' or
similar, and then 'git send-email', passing it all the patches (including the
cover letter) at once.  And please make sure that your company's mail server is
set up to properly handle plaintext email.

Thanks,

- Eric
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help