On 26/02/21 8:12 pm, Dave Gerlach wrote:

Hi,
This is v4 of the series to add initial support for the latest new SoC,
AM642, from Texas Instruments. Additional detail can be found in the
patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2,
Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2

This version contains a few minor fixes from v3:

* Add Rob's Ack to patch 2
* Drop address-cells from interrupt controller node in patch 4 as [1] was dropped
* Add Suman's Signed-off-by to patch 3
* Fix date range in Makefile for TI dtbs in patch 5
* Include Reviewed-by from several people from v3 for multiple patches

v3: https://lore.kernel.org/linux-arm-kernel/20210120202532.9011-1-d-gerlach@ti.com/ (local)
v2: https://lore.kernel.org/linux-arm-kernel/20210119163927.774-1-d-gerlach@ti.com/ (local)
v1: https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@ti.com/ (local)

Kernel Boot logs: https://pastebin.ubuntu.com/p/hFV56bM6Jx/

Tested-by: Kishon Vijay Abraham I <redacted>

Regards,
Dave

[1] https://lore.kernel.org/linux-arm-kernel/161131973654.21299.8023411678794984222.b4-ty@ti.com/ (local)

Dave Gerlach (4):
  dt-bindings: arm: ti: Add bindings for AM642 SoC
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
  arm64: dts: ti: Add support for AM642 SoC
  arm64: dts: ti: Add support for AM642 EVM

Peter Ujfalusi (1):
  arm64: dts: ti: k3-am64-main: Enable DMA support

 .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
 arch/arm64/boot/dts/ti/Makefile               |   4 +-
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      | 405 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi       |  76 ++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           | 103 +++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 246 +++++++++++
 arch/arm64/boot/dts/ti/k3-am642.dtsi          |  65 +++
 include/dt-bindings/pinctrl/k3.h              |   5 +-
 8 files changed, 908 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi