[PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing · Stefan Riedmueller <hidden> · 2021-03-29
[PATCH 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral · Stefan Riedmueller <hidden> · 2021-03-29
Re: [PATCH 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral · Fabio Estevam <festevam@gmail.com> · 2021-03-29
[PATCH 3/3] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces · Stefan Riedmueller <hidden> · 2021-03-29
Re: [PATCH 3/3] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces · Fabio Estevam <festevam@gmail.com> · 2021-03-29
Re: [PATCH 3/3] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces · Stefan Riedmüller <hidden> · 2021-03-29
Re: [PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing · Fabio Estevam <festevam@gmail.com> · 2021-03-29
Re: [PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing · Stefan Riedmüller <hidden> · 2021-03-29

Re: [PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing

From: Fabio Estevam <festevam@gmail.com>
Date: 2021-03-29 11:33:30
Also in: linux-arm-kernel, lkml

Hi Stefan,

On Mon, Mar 29, 2021 at 8:28 AM Stefan Riedmueller
[off-list ref] wrote:

-               pinctrl_usbh1: usbh1grp {
+               pinctrl_usbh1_vbus: usbh1vbusgrp {
                        fsl,pins = <
-                               MX6QDL_PAD_GPIO_0__USB_H1_PWR           0x80000000
+                               MX6QDL_PAD_GPIO_0__GPIO1_IO00           0x80000000

While you are on it, could you please use avoid the usage of
0x80000000 and explicitly pass the default value instead?

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help