As per Dmitry Baryshkov [1]:
a) The 2nd "reg" should be 0x3c because "Offset 0x38 is
   USB3_DP_COM_REVISION_ID3 (not used by the current driver though)."
b) The 3rd "reg" "is a serdes region and qmp_v3_dp_serdes_tbl contains
   registers 0x148 and 0x154."

I think because the 3rd "reg" is a serdes region we should just use
the same size as the 1st "reg"?

[1] https://lore.kernel.org/r/ee5695bb-a603-0dd5-7a7f-695e919b1af1@linaro.org (local)

Cc: Stephen Boyd <redacted>
Cc: Jeykumar Sankaran <redacted>
Cc: Chandan Uddaraju <redacted>
Cc: Vara Reddy <redacted>
Cc: Tanmay Shah <redacted>
Cc: Rob Clark <redacted>
Fixes: 58fd7ae621e7 ("arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy")
Reported-by: Dmitry Baryshkov <redacted>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 83fbb481cae5..61732e5efe62 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -2754,8 +2754,8 @@ usb_1_hsphy: phy@88e3000 {
 		usb_1_qmpphy: phy-wrapper@88e9000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
 			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
+			      <0 0x088e8000 0 0x3c>,
+			      <0 0x088ea000 0 0x18c>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;

-- 
2.31.0.rc2.261.g7f71774620-goog