On 3/12/21 3:32 PM, Michael Walle wrote:

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Am 2021-03-11 20:12, schrieb Pratyush Yadav:

quoted

The main problem here is telling the controller where to find the
pattern and how to read it. This RFC uses nvmem cells which point to a
fixed partition containing the data to do the reads. It depends on [0]
and [1].

The obvious problem with this is it won't work when the partitions are
defined via command line. I don't see any good way to add nvmem cells
to
command line partitions. I would like some help or ideas here. We don't
necessarily have to use nvmem either. Any way that can cleanly and
consistently let the controller find out where the pattern is stored is
good.

The NXP LS1028A SoC has a similar calibration (although there its done
in hardware it seems) and there the datasheet mentions there are flash
devices which supports a preamble before a read function. The preamble
is then some kind of learning pattern. Did you see a flash which
actually
supports that in the wild? I can't find any publicly available

MX66LM1G45G is an example.

datasheets> of 8bit I/O SPI NOR flashes