On Fri, Mar 5, 2021 at 9:05 PM Jonathan Cameron
[off-list ref] wrote:

On Fri, 5 Mar 2021 14:38:13 +0100
Oleksij Rempel [off-list ref] wrote:

quoted

Basically the TI TSC2046 touchscreen controller is 8 channel ADC optimized for
the touchscreen use case. By implementing it as IIO ADC device, we can
make use of resistive-adc-touch and iio-hwmon drivers.

So far, this driver was tested with custom version of resistive-adc-touch driver,
since it need to be extended to make use of Z1 and Z2 channels. The X/Y
are working without additional changes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Hi Oleksij,

To consider this as a possible long term route instead of just making this
a touchscreen driver, we'll want to see those mods to the resistive-adc-touch.
Of course that doesn't stop review of this in the meantime.

There are quite a few things in here that feel pretty specific to the touchscreen
usecase. That makes me wonder if this is a sensible approach or not.

I'm wondering if this has any similarities with existing drivers under
drivers/input/touchscreen.

-- 
With Best Regards,
Andy Shevchenko