Hi Nishanth,
On 05/03/21 10:44 am, Nishanth Menon wrote:
On 10:59-20210301, Kishon Vijay Abraham I wrote:
quoted
On 25/02/21 6:57 pm, Aswath Govindraju wrote:
quoted
According to latest errata of J721e [1], HS400 mode is not supported
in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.
Also, update the itap delay values for all the MMCSD subsystems according
the latest J721e data sheet[2]
[1] - https://www.ti.com/lit/er/sprz455/sprz455.pdf
[2] - https://www.ti.com/lit/ds/symlink/tda4vm.pdf
Fixes: e6dc10f200da ("arm64: dts: ti: j721e-main: Add SDHCI nodes")
Signed-off-by: Aswath Govindraju <redacted>
Reviewed-by: Kishon Vijay Abraham I <redacted>
In some offline testing, I realized that the patch wont apply cleanly to e6dc10f200da
cd48ce86a4d0c1ffec86aa46a26da993c9af5f53 might be a better candidate for
this - I will drop the patch from my queue in the morning, could you
update the patch with a new rev with appropriate Fixes?
Sorry, I'll send a respin(v2) of this patch after correcting the fixes
tag to,
Fixes: cd48ce86a4d0 ("arm64: dts: ti: k3-j721e-common-proc-board: Add
support for SD card UHS modes")
Thanks,
Aswath