[PATCH v4 1/2] dt-bindings: serial: Add rx-tx-swap to stm32-usart
From: Martin Devera <hidden>
Date: 2021-03-02 22:09:45
Also in:
linux-arm-kernel, linux-serial, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, tty layer and serial drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Add new rx-tx-swap property to allow for RX & TX pin swapping. Signed-off-by: Martin Devera <redacted> --- .../devicetree/bindings/serial/st,stm32-uart.yaml | 32 +++++++++++++++------- 1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 8631678283f9..6eab2debebb5 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml@@ -9,9 +9,6 @@ maintainers: title: STMicroelectronics STM32 USART bindings -allOf: - - $ref: rs485.yaml - properties: compatible: enum:
@@ -40,6 +37,10 @@ properties: uart-has-rtscts: true + rx-tx-swap: + type: boolean + maxItems: 1 + dmas: minItems: 1 maxItems: 2
@@ -66,13 +67,24 @@ properties: linux,rs485-enabled-at-boot-time: true rs485-rx-during-tx: true -if: - required: - - st,hw-flow-ctrl -then: - properties: - cts-gpios: false - rts-gpios: false +allOf: + - $ref: rs485.yaml + - if: + required: + - st,hw-flow-ctrl + then: + properties: + cts-gpios: false + rts-gpios: false + - if: + required: + - rx-tx-swap + then: + properties: + compatible: + enum: + - st,stm32f7-uart + - st,stm32h7-uart required: - compatible
--
2.11.0