Thread (27 messages) 27 messages, 6 authors, 2021-03-02

RE: [PATCH RESEND v4 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support

From: Aisheng Dong <aisheng.dong@nxp.com>
Date: 2021-02-26 08:35:05
Also in: linux-arm-kernel, linux-mmc

Hi Shawn,

Could you please help take a look at this patch series? It's been without comments for months.
Please let me know if you want me to resend now or I can resend later with new comments addressed if any.

Regards
Aisheng
From: Aisheng Dong <aisheng.dong@nxp.com>
Sent: Thursday, November 26, 2020 6:59 PM

IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number
of SS (Subsystems), those SS may be shared between different SoCs while most
of them can be reused like Devices Resources, Clocks, Power domains and etc.

This patch series aims to improve the MX8 architecture to comply with the HW
design to save a lot of duplicated codes and benefits us a better
maintainability and scalability in the future.

ChangeLog:
v4-resend:
 * no change except put three module binding patches first which are used
   by this patchset.
v3->v4:
 * mainly rebase to latest kernel except a few very minor changes like change
to use
   new scu protocol binding which was not supported in last version
v2->v3:
 * use clock-indices property instead of bit-offset property suggested by
Shawn Guo
 * rebase to latest shawn/for-next
v1->v2:
 * change to the new two cells scu clock binding, so original adding scu clocks
   patches were removed.
 * Move scu pd node above clk node


Dong Aisheng (18):
  dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible
    string
  dt-bindings: arm: fsl: add imx8qm boards compatible string
  dt-bindings: mailbox: mu: add imx8qm support
  arm64: dts: imx8qxp: add fallback compatible string for scu pd
  arm64: dts: imx8qxp: move scu pd node before scu clock node
  arm64: dts: imx8qxp: orginize dts in subsystems
  arm64: dts: imx8: add lsio lpcg clocks
  arm64: dts: imx8: add conn lpcg clocks
  arm64: dts: imx8: add adma lpcg clocks
  arm64: dts: imx8: switch to two cell scu clock binding
  arm64: dts: imx8: switch to new lpcg clock binding
  arm64: dts: imx8qm: add lsio ss support
  arm64: dts: imx8qm: add conn ss support
  arm64: dts: imx8: split adma ss into dma and audio ss
  arm64: dts: imx8qm: add dma ss support
  arm64: dts: imx: add imx8qm common dts file
  arm64: dts: imx: add imx8qm mek support
  arm64: defconfig: add imx8qm mek support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/mailbox/fsl,mu.yaml   |   5 +-
 .../bindings/mmc/fsl-imx-esdhc.yaml           |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
 .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 184 ++++++++
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  18
+  .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
 .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
 .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 176 ++++++++
 .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
 .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
 .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  50 +--
 .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
 .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  25 ++
 .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 423 ++----------------
 arch/arm64/configs/defconfig                  |   1 +
 24 files changed, 1455 insertions(+), 439 deletions(-)  create mode 100644
arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi

--
2.23.0
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help