[PATCH 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
From: Rafał Miłecki <zajec5@gmail.com>
Date: 2021-02-15 20:42:14
Also in:
linux-arm-kernel
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Rafał Miłecki <rafal@milecki.pl> R8000P model has 4 LAN ports and 1 WAN port. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- .../bcm4908/bcm4906-netgear-r8000p.dts | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index bf0d534ace2e..af2616e82e83 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts@@ -43,6 +43,31 @@ &xhci { status = "okay"; }; +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>;
--
2.26.2