[PATCH 1/2] dt-bindings: misc: add binding for generic ripple counter

From
Rasmus Villemoes <linux@rasmusvillemoes.dk>
Date
2021-02-26 14:15:55
Also in
linux-clk, lkml
Reply to
Rasmus Villemoes, 2021-02-26
While a ripple counter can not usually be interfaced with (directly)
from software, it may still be a crucial component in a board
layout. To prevent its input clock from being disabled by the clock
core because it apparently has no consumer, one needs to be able to
represent that consumer in DT.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 Documentation/devicetree/bindings/misc/ripple-ctr.txt | 8 ++++++++
 1 file changed, 8 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/ripple-ctr.txt
diff --git a/Documentation/devicetree/bindings/misc/ripple-ctr.txt b/Documentation/devicetree/bindings/misc/ripple-ctr.txt
new file mode 100644
index 000000000000..1497d3a237a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ripple-ctr.txt
@@ -0,0 +1,8 @@
+Generic ripple counter
+
+A ripple counter is a simple component that can for example be used to
+delay propagation of a signal.
+
+Required properties:
+- compatible: Must be "linux,ripple-ctr".
+- clocks: Input clock specifier. Refer to common clock bindings.
-- 
2.29.2
Thread (22 messages) 22 messages, 7 authors, last reply 2022-03-05
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help