[PATCH v3 0/2] arm64: dts: qcom: sm8250: fix display nodes

STALE2006d

Revision v3 of 3 in this series.

7 messages, 4 authors, 2021-03-12 · open the first message on its own page

[PATCH v3 0/2] arm64: dts: qcom: sm8250: fix display nodes

From: Jonathan Marek <hidden>
Date: 2021-02-15 17:28:49

Add sm8150/sm8250 compatibles to drm/msm and fix the sm8250
display nodes.

v2: do not remove mmcx-supply from dispcc node
v3: remove references to dp_phy (missed this in v2, sorry for the spam)

Jonathan Marek (2):
  drm/msm: add compatibles for sm8150/sm8250 display
  arm64: dts: qcom: sm8250: fix display nodes

 .../devicetree/bindings/display/msm/dpu.txt   |  4 +--
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 31 +++++--------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  2 ++
 drivers/gpu/drm/msm/msm_drv.c                 |  6 ++--
 4 files changed, 15 insertions(+), 28 deletions(-)

-- 
2.26.1

[PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display

From: Jonathan Marek <hidden>
Date: 2021-02-15 17:28:48

The driver already has support for sm8150/sm8250, but the compatibles were
never added.

Also inverse the non-mdp4 condition in add_display_components() to avoid
having to check every new compatible in the condition.

Signed-off-by: Jonathan Marek <redacted>
---
 Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c               | 2 ++
 drivers/gpu/drm/msm/msm_drv.c                         | 6 +++---
 3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26f60da..5763f43200a0 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
 
 MDSS:
 Required properties:
-- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
+- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss"
 - reg: physical base address and length of contoller's registers.
 - reg-names: register region names. The following region is required:
   * "mdss"
@@ -41,7 +41,7 @@ Optional properties:
 
 MDP:
 Required properties:
-- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu"
 - reg: physical base address and length of controller's registers.
 - reg-names : register region names. The following region is required:
   * "mdp"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 5a8e3e1fc48c..fff12a4c8bfc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = {
 static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,sdm845-dpu", },
 	{ .compatible = "qcom,sc7180-dpu", },
+	{ .compatible = "qcom,sm8150-dpu", },
+	{ .compatible = "qcom,sm8250-dpu", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dpu_dt_match);
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 94525ac76d4e..928f13d4bfbc 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev,
 	 * Populate the children devices, find the MDP5/DPU node, and then add
 	 * the interfaces to our components list.
 	 */
-	if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
-	    of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
-	    of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
+	if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) {
 		ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
 		if (ret) {
 			DRM_DEV_ERROR(dev, "failed to populate children devices\n");
@@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = {
 	{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
 	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
+	{ .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
+	{ .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dt_match);
-- 
2.26.1

[PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

From: Jonathan Marek <hidden>
Date: 2021-02-15 17:28:49

Apply these fixes to the newly added sm8250 display ndoes
 - Use sm8250 compatibles instead of sdm845 compatibles
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <redacted>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
 1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..693ac533f9b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
 		};
 
 		mdss: mdss@ae00000 {
-			compatible = "qcom,sdm845-mdss";
+			compatible = "qcom,sm8250-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-					<&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
 					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-			interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+			interconnect-names = "mdp0-mem", "mdp1-mem";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
 			ranges;
 
 			mdss_mdp: mdp@ae01000 {
-				compatible = "qcom,sdm845-dpu";
+				compatible = "qcom,sm8250-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
 				      <0 0x0aeb0000 0 0x2008>;
 				reg-names = "mdp", "vbif";
@@ -2580,7 +2579,7 @@ opp-358000000 {
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8250-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x10000>;
 			mmcx-supply = <&mmcx_reg>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&sleep_clk>;
+				 <0>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dsi1_phy_pll_out_byteclk",
 				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
-				      "dptx2_phy_pll_link_clk",
-				      "dptx2_phy_pll_vco_div_clk",
-				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk",
-				      "sleep_clk";
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-- 
2.26.1

Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

From: Dmitry Baryshkov <hidden>
Date: 2021-02-16 21:15:19

Except for the compatible value changes:

Reviewed-by: Dmitry Baryshkov <redacted>

May I suggest to split the compatibility name changes into a separate
series from this patch (without it the patch stands a chance of being
accepted into the stable tree, if I'm not mistaken).

On Mon, 15 Feb 2021 at 19:27, Jonathan Marek [off-list ref] wrote:
quoted hunk
Apply these fixes to the newly added sm8250 display ndoes
 - Use sm8250 compatibles instead of sdm845 compatibles
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <redacted>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
 1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..693ac533f9b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
                };

                mdss: mdss@ae00000 {
-                       compatible = "qcom,sdm845-mdss";
+                       compatible = "qcom,sm8250-mdss";
                        reg = <0 0x0ae00000 0 0x1000>;
                        reg-names = "mdss";

-                       interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-                                       <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                       interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
                                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-                       interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+                       interconnect-names = "mdp0-mem", "mdp1-mem";

                        power-domains = <&dispcc MDSS_GDSC>;
@@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
                        ranges;

                        mdss_mdp: mdp@ae01000 {
-                               compatible = "qcom,sdm845-dpu";
+                               compatible = "qcom,sm8250-dpu";
                                reg = <0 0x0ae01000 0 0x8f000>,
                                      <0 0x0aeb0000 0 0x2008>;
                                reg-names = "mdp", "vbif";
@@ -2580,7 +2579,7 @@ opp-358000000 {

                dispcc: clock-controller@af00000 {
                        compatible = "qcom,sm8250-dispcc";
-                       reg = <0 0x0af00000 0 0x20000>;
+                       reg = <0 0x0af00000 0 0x10000>;
                        mmcx-supply = <&mmcx_reg>;
                        clocks = <&rpmhcc RPMH_CXO_CLK>,
                                 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
                                 <&dsi1_phy 0>,
                                 <&dsi1_phy 1>,
                                 <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <&sleep_clk>;
+                                <0>;
                        clock-names = "bi_tcxo",
                                      "dsi0_phy_pll_out_byteclk",
                                      "dsi0_phy_pll_out_dsiclk",
                                      "dsi1_phy_pll_out_byteclk",
                                      "dsi1_phy_pll_out_dsiclk",
-                                     "dp_link_clk_divsel_ten",
-                                     "dp_vco_divided_clk_src_mux",
-                                     "dptx1_phy_pll_link_clk",
-                                     "dptx1_phy_pll_vco_div_clk",
-                                     "dptx2_phy_pll_link_clk",
-                                     "dptx2_phy_pll_vco_div_clk",
-                                     "edp_phy_pll_link_clk",
-                                     "edp_phy_pll_vco_div_clk",
-                                     "sleep_clk";
+                                     "dp_phy_pll_link_clk",
+                                     "dp_phy_pll_vco_div_clk";
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                        #power-domain-cells = <1>;
--
2.26.1

-- 
With best wishes
Dmitry

Re: [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display

From: Rob Herring <robh@kernel.org>
Date: 2021-03-05 21:47:24

On Mon, 15 Feb 2021 11:26:04 -0500, Jonathan Marek wrote:
The driver already has support for sm8150/sm8250, but the compatibles were
never added.

Also inverse the non-mdp4 condition in add_display_components() to avoid
having to check every new compatible in the condition.

Signed-off-by: Jonathan Marek <redacted>
---
 Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c               | 2 ++
 drivers/gpu/drm/msm/msm_drv.c                         | 6 +++---
 3 files changed, 7 insertions(+), 5 deletions(-)
Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

From: Bjorn Andersson <hidden>
Date: 2021-03-11 00:10:45

On Tue 16 Feb 15:14 CST 2021, Dmitry Baryshkov wrote:
Except for the compatible value changes:

Reviewed-by: Dmitry Baryshkov <redacted>

May I suggest to split the compatibility name changes into a separate
series from this patch (without it the patch stands a chance of being
accepted into the stable tree, if I'm not mistaken).
Please let me know what I should do with this patch.

Regards,
Bjorn
On Mon, 15 Feb 2021 at 19:27, Jonathan Marek [off-list ref] wrote:
quoted
Apply these fixes to the newly added sm8250 display ndoes
 - Use sm8250 compatibles instead of sdm845 compatibles
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <redacted>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
 1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..693ac533f9b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
                };

                mdss: mdss@ae00000 {
-                       compatible = "qcom,sdm845-mdss";
+                       compatible = "qcom,sm8250-mdss";
                        reg = <0 0x0ae00000 0 0x1000>;
                        reg-names = "mdss";

-                       interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-                                       <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                       interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
                                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-                       interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+                       interconnect-names = "mdp0-mem", "mdp1-mem";

                        power-domains = <&dispcc MDSS_GDSC>;
@@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
                        ranges;

                        mdss_mdp: mdp@ae01000 {
-                               compatible = "qcom,sdm845-dpu";
+                               compatible = "qcom,sm8250-dpu";
                                reg = <0 0x0ae01000 0 0x8f000>,
                                      <0 0x0aeb0000 0 0x2008>;
                                reg-names = "mdp", "vbif";
@@ -2580,7 +2579,7 @@ opp-358000000 {

                dispcc: clock-controller@af00000 {
                        compatible = "qcom,sm8250-dispcc";
-                       reg = <0 0x0af00000 0 0x20000>;
+                       reg = <0 0x0af00000 0 0x10000>;
                        mmcx-supply = <&mmcx_reg>;
                        clocks = <&rpmhcc RPMH_CXO_CLK>,
                                 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
                                 <&dsi1_phy 0>,
                                 <&dsi1_phy 1>,
                                 <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <&sleep_clk>;
+                                <0>;
                        clock-names = "bi_tcxo",
                                      "dsi0_phy_pll_out_byteclk",
                                      "dsi0_phy_pll_out_dsiclk",
                                      "dsi1_phy_pll_out_byteclk",
                                      "dsi1_phy_pll_out_dsiclk",
-                                     "dp_link_clk_divsel_ten",
-                                     "dp_vco_divided_clk_src_mux",
-                                     "dptx1_phy_pll_link_clk",
-                                     "dptx1_phy_pll_vco_div_clk",
-                                     "dptx2_phy_pll_link_clk",
-                                     "dptx2_phy_pll_vco_div_clk",
-                                     "edp_phy_pll_link_clk",
-                                     "edp_phy_pll_vco_div_clk",
-                                     "sleep_clk";
+                                     "dp_phy_pll_link_clk",
+                                     "dp_phy_pll_vco_div_clk";
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                        #power-domain-cells = <1>;
--
2.26.1

-- 
With best wishes
Dmitry

Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

From: Dmitry Baryshkov <hidden>
Date: 2021-03-12 21:45:10

On Thu, 11 Mar 2021 at 03:10, Bjorn Andersson
[off-list ref] wrote:
On Tue 16 Feb 15:14 CST 2021, Dmitry Baryshkov wrote:
quoted
Except for the compatible value changes:

Reviewed-by: Dmitry Baryshkov <redacted>

May I suggest to split the compatibility name changes into a separate
series from this patch (without it the patch stands a chance of being
accepted into the stable tree, if I'm not mistaken).
Please let me know what I should do with this patch.
I suggested splitting the compatibility settings, so that the fixes
can go into the stable branch. I can carve that out, if Jonathan does
not object.
Regards,
Bjorn
quoted
On Mon, 15 Feb 2021 at 19:27, Jonathan Marek [off-list ref] wrote:
quoted
Apply these fixes to the newly added sm8250 display ndoes
 - Use sm8250 compatibles instead of sdm845 compatibles
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <redacted>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
 1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..693ac533f9b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
                };

                mdss: mdss@ae00000 {
-                       compatible = "qcom,sdm845-mdss";
+                       compatible = "qcom,sm8250-mdss";
                        reg = <0 0x0ae00000 0 0x1000>;
                        reg-names = "mdss";

-                       interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-                                       <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                       interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
                                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-                       interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+                       interconnect-names = "mdp0-mem", "mdp1-mem";

                        power-domains = <&dispcc MDSS_GDSC>;
@@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
                        ranges;

                        mdss_mdp: mdp@ae01000 {
-                               compatible = "qcom,sdm845-dpu";
+                               compatible = "qcom,sm8250-dpu";
                                reg = <0 0x0ae01000 0 0x8f000>,
                                      <0 0x0aeb0000 0 0x2008>;
                                reg-names = "mdp", "vbif";
@@ -2580,7 +2579,7 @@ opp-358000000 {

                dispcc: clock-controller@af00000 {
                        compatible = "qcom,sm8250-dispcc";
-                       reg = <0 0x0af00000 0 0x20000>;
+                       reg = <0 0x0af00000 0 0x10000>;
                        mmcx-supply = <&mmcx_reg>;
                        clocks = <&rpmhcc RPMH_CXO_CLK>,
                                 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
                                 <&dsi1_phy 0>,
                                 <&dsi1_phy 1>,
                                 <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <0>,
-                                <&sleep_clk>;
+                                <0>;
                        clock-names = "bi_tcxo",
                                      "dsi0_phy_pll_out_byteclk",
                                      "dsi0_phy_pll_out_dsiclk",
                                      "dsi1_phy_pll_out_byteclk",
                                      "dsi1_phy_pll_out_dsiclk",
-                                     "dp_link_clk_divsel_ten",
-                                     "dp_vco_divided_clk_src_mux",
-                                     "dptx1_phy_pll_link_clk",
-                                     "dptx1_phy_pll_vco_div_clk",
-                                     "dptx2_phy_pll_link_clk",
-                                     "dptx2_phy_pll_vco_div_clk",
-                                     "edp_phy_pll_link_clk",
-                                     "edp_phy_pll_vco_div_clk",
-                                     "sleep_clk";
+                                     "dp_phy_pll_link_clk",
+                                     "dp_phy_pll_vco_div_clk";
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                        #power-domain-cells = <1>;
--
2.26.1

--
With best wishes
Dmitry


-- 
With best wishes
Dmitry
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help