[PATCH] arm64: dts: imx8mn-beacon: Enable SDR104 on WiFi SDIO interface
From: Adam Ford <hidden>
Date: 2021-02-14 20:18:50
Also in:
linux-arm-kernel, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Enable 100Mhz and 200MHz pinmux and corrsesponding voltage supplies to enable SDR104 on usdhc1 connecting the WiFi chip. Signed-off-by: Adam Ford <redacted>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index de2cd0e3201c..c35eeaff958f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi@@ -262,8 +262,12 @@ bluetooth { &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; bus-width = <4>; non-removable; cap-power-off-card;
--
2.25.1