[PATCH 2/3] dt-bindings: regulator: pca9450: Add sd-vsel GPIO
flat view
DORMANTno replies
LANDED
From: Schrempf Frieder <hidden>
Date: 2021-02-11 11:29:23
Also in:
lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Status: Landed in mainline as 27866e3e8a7e on 2021-02-11.
From: Frieder Schrempf <redacted> Add the binding documentation for the optional sd-vsel GPIO. Signed-off-by: Frieder Schrempf <redacted> --- .../devicetree/bindings/regulator/nxp,pca9450-regulator.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index c2b0a8b6da1e..f70f2e758a00 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml@@ -87,6 +87,11 @@ properties: additionalProperties: false + sd-vsel-gpios: + description: GPIO that is used to switch LDO5 between being configured by + LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is + connected to a host GPIO. + required: - compatible - reg
--
2.25.1