[PATCH 06/27] ARM: dts: Configure interconnect target module for dra7 qspi
From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 18:59:04
Also in:
linux-omap, linux-pci
Subsystem:
the rest · Maintainer:
Linus Torvalds
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7.dtsi | 41 ++++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi@@ -752,20 +752,37 @@ abb_gpu: regulator-abb-gpu { >; }; - qspi: spi@4b300000 { - compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - syscon-chipselects = <&scm_conf 0x558>; - #address-cells = <1>; - #size-cells = <0>; + target-module@4b300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "qspi"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + reg = <0x4b300000 0x4>, + <0x4b300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>; clock-names = "fck"; - num-cs = <4>; - interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b300000 0x1000>, + <0x5c000000 0x5c000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,dra7xxx-qspi"; + reg = <0 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; /* OCP2SCP3 */
--
2.30.0