[PATCH 10/15] ARM: dts: Configure simple-pm-bus for dra7 l4_wkup
From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 12:42:32
Also in:
linux-omap, linux-pci
Subsystem:
the rest · Maintainer:
Linus Torvalds
We can now probe interconnects with device tree only configuration using simple-pm-bus and genpd. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7-l4.dtsi | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi@@ -4228,7 +4228,10 @@ vpe: vpe@0 { }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,dra7-l4-wkup", "simple-bus"; + compatible = "ti,dra7-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>;
@@ -4241,7 +4244,7 @@ &l4_wkup { /* 0x4ae00000 */ <0x00030000 0x4ae30000 0x010000>; /* segment 3 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
@@ -4318,7 +4321,7 @@ scm_wkup: scm_conf@0 { }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
@@ -4428,7 +4431,7 @@ target-module@c000 { /* 0x4ae1c000, ap 11 38.0 */ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
@@ -4534,7 +4537,7 @@ target-module@f000 { /* 0x4ae2f000, ap 32 58.0 */ }; segment@30000 { /* 0x4ae30000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */
--
2.30.0