According to the schematic there is an external pull up, so there is no
need to enable the internal one additionally. Using no pull up matches
the vendor device tree.

Signed-off-by: Uwe Kleine-König <redacted>
---
 arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index d6446c32b91e..1e880a0a3f69 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts

@@ -331,7 +331,7 @@ sys_red_led_on: sys-red-led-on {
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 

-- 
2.29.2