Re: [PATCH v4 1/9] mmc: add basic support for inline encryption
From: Ulf Hansson <hidden>
Date: 2021-01-15 09:23:24
Also in:
linux-arm-msm, linux-fscrypt, linux-mmc
On Mon, 4 Jan 2021 at 19:48, Eric Biggers [off-list ref] wrote:
From: Eric Biggers <redacted> In preparation for adding CQHCI crypto engine (inline encryption) support, add the code required to make mmc_core and mmc_block aware of inline encryption. Specifically: - Add a capability flag MMC_CAP2_CRYPTO to struct mmc_host. Drivers will set this if the host and driver support inline encryption. - Embed a blk_keyslot_manager in struct mmc_host. Drivers will initialize this if the host and driver support inline encryption. mmc_block registers this keyslot manager with the request_queue of any MMC card attached to the host. mmc_core destroys this keyslot manager when freeing the mmc_host. - Make mmc_block copy the crypto keyslot and crypto data unit number from struct request to struct mmc_request, so that drivers will have access to them. - If the MMC host is reset, reprogram all the keyslots to ensure that the software state stays in sync with the hardware state. Co-developed-by: Satya Tangirala <redacted> Signed-off-by: Satya Tangirala <redacted> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Satya Tangirala <redacted> Reviewed-and-tested-by: Peng Zhou [off-list ref] Signed-off-by: Eric Biggers <redacted>
Eric, again, my apologies for the delay. Overall, I think this looks good. My only hesitation to merge this as is, is that I want to make sure you have thought of the life cycle issues for the struct blk_keyslot_manager ksm. It's being used both from the mmc core/block device driver and the mmc host driver. I am looking at this right now and will get back to you very soon, if I find some issues with it. If you have some time, feel free to elaborate around how this is intended to work. Kind regards Uffe
quoted hunk ↗ jump to hunk
--- drivers/mmc/core/Kconfig | 8 ++++++ drivers/mmc/core/Makefile | 1 + drivers/mmc/core/block.c | 3 +++ drivers/mmc/core/core.c | 3 +++ drivers/mmc/core/crypto.c | 54 +++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/crypto.h | 46 +++++++++++++++++++++++++++++++++ drivers/mmc/core/host.c | 2 ++ drivers/mmc/core/queue.c | 3 +++ include/linux/mmc/core.h | 6 +++++ include/linux/mmc/host.h | 7 +++++ 10 files changed, 133 insertions(+) create mode 100644 drivers/mmc/core/crypto.c create mode 100644 drivers/mmc/core/crypto.hdiff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index c12fe13e4b147..ae8b69aee6190 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig@@ -81,3 +81,11 @@ config MMC_TEST This driver is only of interest to those developing or testing a host driver. Most people should say N here. +config MMC_CRYPTO + bool "MMC Crypto Engine Support" + depends on BLK_INLINE_ENCRYPTION
What about making this "default y" as well.
quoted hunk ↗ jump to hunk
+ help + Enable Crypto Engine Support in MMC. + Enabling this makes it possible for the kernel to use the crypto + capabilities of the MMC device (if present) to perform crypto + operations on data being transferred to/from the device.diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 95ffe008ebdf8..6a907736cd7a5 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile@@ -18,3 +18,4 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o mmc_block-objs := block.o queue.o obj-$(CONFIG_MMC_TEST) += mmc_test.o obj-$(CONFIG_SDIO_UART) += sdio_uart.o +mmc_core-$(CONFIG_MMC_CRYPTO) += crypto.odiff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 42e27a2982180..b877f62df3660 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c@@ -51,6 +51,7 @@ #include "block.h" #include "core.h" #include "card.h" +#include "crypto.h" #include "host.h" #include "bus.h" #include "mmc_ops.h"@@ -1247,6 +1248,8 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, memset(brq, 0, sizeof(struct mmc_blk_request)); + mmc_crypto_prepare_req(mqrq); + brq->mrq.data = &brq->data; brq->mrq.tag = req->tag;diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 19f1ee57fb345..bd4b557e68899 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c@@ -37,6 +37,7 @@ #include "core.h" #include "card.h" +#include "crypto.h" #include "bus.h" #include "host.h" #include "sdio_bus.h"@@ -992,6 +993,8 @@ void mmc_set_initial_state(struct mmc_host *host) host->ops->hs400_enhanced_strobe(host, &host->ios); mmc_set_ios(host); + + mmc_crypto_set_initial_state(host); } /**diff --git a/drivers/mmc/core/crypto.c b/drivers/mmc/core/crypto.c new file mode 100644 index 0000000000000..4f47eb4740db0 --- /dev/null +++ b/drivers/mmc/core/crypto.c@@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MMC crypto engine (inline encryption) support + * + * Copyright 2020 Google LLC + */ + +#include <linux/blk-crypto.h> +#include <linux/mmc/host.h> + +#include "core.h" +#include "crypto.h" +#include "queue.h" + +void mmc_crypto_set_initial_state(struct mmc_host *host) +{ + /* Reset might clear all keys, so reprogram all the keys. */ + if (host->caps2 & MMC_CAP2_CRYPTO) + blk_ksm_reprogram_all_keys(&host->ksm); +} + +void mmc_crypto_free_host(struct mmc_host *host) +{ + if (host->caps2 & MMC_CAP2_CRYPTO) + blk_ksm_destroy(&host->ksm); +} + +void mmc_crypto_setup_queue(struct request_queue *q, struct mmc_host *host) +{ + if (host->caps2 & MMC_CAP2_CRYPTO) + blk_ksm_register(&host->ksm, q); +} +EXPORT_SYMBOL_GPL(mmc_crypto_setup_queue); + +void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq) +{ + struct request *req = mmc_queue_req_to_req(mqrq); + struct mmc_request *mrq = &mqrq->brq.mrq; + + if (!req->crypt_keyslot) + return; + + mrq->crypto_enabled = true; + mrq->crypto_key_slot = blk_ksm_get_slot_idx(req->crypt_keyslot); + + /* + * For now we assume that all MMC drivers set max_dun_bytes_supported=4, + * which is the limit for CQHCI crypto. So all DUNs should be 32-bit. + */ + WARN_ON_ONCE(req->crypt_ctx->bc_dun[0] > U32_MAX); + + mrq->data_unit_num = req->crypt_ctx->bc_dun[0]; +} +EXPORT_SYMBOL_GPL(mmc_crypto_prepare_req);diff --git a/drivers/mmc/core/crypto.h b/drivers/mmc/core/crypto.h new file mode 100644 index 0000000000000..4780639b832f4 --- /dev/null +++ b/drivers/mmc/core/crypto.h@@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * MMC crypto engine (inline encryption) support + * + * Copyright 2020 Google LLC + */ + +#ifndef _MMC_CORE_CRYPTO_H +#define _MMC_CORE_CRYPTO_H + +struct mmc_host; +struct mmc_queue_req; +struct request_queue; + +#ifdef CONFIG_MMC_CRYPTO + +void mmc_crypto_set_initial_state(struct mmc_host *host); + +void mmc_crypto_free_host(struct mmc_host *host); + +void mmc_crypto_setup_queue(struct request_queue *q, struct mmc_host *host); + +void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq); + +#else /* CONFIG_MMC_CRYPTO */ + +static inline void mmc_crypto_set_initial_state(struct mmc_host *host) +{ +} + +static inline void mmc_crypto_free_host(struct mmc_host *host) +{ +} + +static inline void mmc_crypto_setup_queue(struct request_queue *q, + struct mmc_host *host) +{ +} + +static inline void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq) +{ +} + +#endif /* !CONFIG_MMC_CRYPTO */ + +#endif /* _MMC_CORE_CRYPTO_H */diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 96b2ca1f1b06d..d962b9ca0e37a 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c@@ -25,6 +25,7 @@ #include <linux/mmc/slot-gpio.h> #include "core.h" +#include "crypto.h" #include "host.h" #include "slot-gpio.h" #include "pwrseq.h"@@ -532,6 +533,7 @@ EXPORT_SYMBOL(mmc_remove_host); */ void mmc_free_host(struct mmc_host *host) { + mmc_crypto_free_host(host); mmc_pwrseq_free(host); put_device(&host->class_dev); }diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index de7cb0369c308..d96db852bb91a 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c@@ -19,6 +19,7 @@ #include "block.h" #include "core.h" #include "card.h" +#include "crypto.h" #include "host.h" #define MMC_DMA_MAP_MERGE_SEGMENTS 512@@ -405,6 +406,8 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) mutex_init(&mq->complete_lock); init_waitqueue_head(&mq->wait); + + mmc_crypto_setup_queue(mq->queue, host); } static inline bool mmc_merge_capable(struct mmc_host *host)diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 29aa507116261..ab19245e99451 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h@@ -162,6 +162,12 @@ struct mmc_request { bool cap_cmd_during_tfr; int tag; + +#ifdef CONFIG_MMC_CRYPTO + bool crypto_enabled; + int crypto_key_slot; + u32 data_unit_num; +#endif }; struct mmc_card;diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 01bba36545c54..6f86948f92caf 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h@@ -15,6 +15,7 @@ #include <linux/mmc/card.h> #include <linux/mmc/pm.h> #include <linux/dma-direction.h> +#include <linux/keyslot-manager.h> struct mmc_ios { unsigned int clock; /* clock rate */@@ -384,6 +385,7 @@ struct mmc_host { #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ #define MMC_CAP2_MERGE_CAPABLE (1 << 26) /* Host can merge a segment over the segment size */ +#define MMC_CAP2_CRYPTO (1 << 27) /* Host supports inline encryption */ int fixed_drv_type; /* fixed driver type for non-removable media */@@ -478,6 +480,11 @@ struct mmc_host { bool cqe_enabled; bool cqe_on; + /* Inline encryption support */ +#ifdef CONFIG_MMC_CRYPTO + struct blk_keyslot_manager ksm; +#endif + /* Host Software Queue support */ bool hsq_enabled; --2.30.0