[PATCH net-next 1/2] dt: ar803x: document SmartEEE properties
From: Russell King <hidden>
Date: 2021-01-14 10:47:00
Also in:
netdev
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The SmartEEE feature of Atheros AR803x PHYs can cause the link to bounce. Add DT properties to allow SmartEEE to be disabled, and to allow the Tw parameters for 100M and 1G links to be configured. Signed-off-by: Russell King <redacted> --- .../devicetree/bindings/net/qca,ar803x.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index 64b3357ade8a..b3d4013b7ca6 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml@@ -28,6 +28,10 @@ description: | $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] + qca,disable-smarteee: + description: Disable Atheros SmartEEE feature. + type: boolean + qca,keep-pll-enabled: description: | If set, keep the PLL enabled even if there is no link. Useful if you
@@ -36,6 +40,18 @@ description: | Only supported on the AR8031. type: boolean + qca,smarteee-tw-us-100m: + description: EEE Tw parameter for 100M links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + + qca,smarteee-tw-us-1g: + description: EEE Tw parameter for gigabit links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + vddio-supply: description: | RGMII I/O voltage regulator (see regulator/regulator.yaml).
--
2.20.1